Solid wood bunk beds can be a great space saver in your children’s bedroom. The first build platform. Screws two long and two short beams into a square, so the blocks are on the edge. Use two wooden screws in each corner. You may pre-drill the screw hole with a 1/8 inch drill less than the screw diameter. Drill two holes in each corner of your frame with a drill with the same diameter as your bolt. Place the first whole an inch from the top in a long beam. Put another whole an inch below the first hole.
Build platform for solid wood bunk beds, place the plywood over the frame and attach it to the frame with a wooden screw. Drill holes with 1/8 inch drill less than your wood screws. And then drill one hole in each corner, two holes with uniform distances on each side of the length and one hole in the center of each short side. Place a 2/1 inch hole from the outer plywood drive. Attach the strip platform to the limit, even with an outside machine. Use wood screws, drill each one through the strip and into the hole you drill into the plywood and beams.
Then to make a solid wood bunk beds is frame the assemble, drill two holes approximately 1 foot from the end of each pole. Attach platform to your post with bolt. Do this in bed, because the bedding bed is designed will be much more difficult to move some parts of the individual. Then place the mattress on the platform; use the strip to hold it in place. Attach the board to create crossover fence panels. And then put each of them on the outside of the long side and tighten with the wooden screws left behind. And then many home improvement centers offer classes on woodworking, power tools and other do-it-yourself projects. If you are not sure about your skills in these areas, consider taking a class. This project requires the use of power tools. If you are not familiar with power tools, seek an instruction or guidance from an expert.