Twin platform bed with trundle – Double bed is big enough for two people comfortably, but in many smaller bedrooms, a bed of this size means little room for other furniture. Double bed platform with drawers underneath will help you regain lost luggage space without impinging on the comfort queen bed provides. Cut four pieces of 2-times-4 to 58 inches long, using the circular saw. Cut four 80 inches. Cut four 10 inches. Enter the 1-inch pilot with the router. Cut a 1 inch deep, 1-inch wide cavity along the 2 inch wide face of two 80-inch pieces with the router. These are grooves that slat to keep the mattress fit.
Twin platform bed with trundle, get a 1-inch width of 1-inch-long on 2-inch wide ends of 58-inch pieces and 80-inch-long pieces. Cut away boxes with a baufil to leave a 1-inch wide, 1-inch-long and 4-inch deep notch. Block the 58-inch and 80-inch pieces on the notches to form two rectangular frames. Secure the slat grooves face each other. Fasten the joints into the sub frames of the screws long screws and a hammer drill with a screwdriver drill bit. Coat the end faces of the 10-inch with trellis. Keep 10-inch bites to corners of rectangular frames to bed frame with a 10-inch piece as each corner support holds frames apart. Reinforce the joints with screws long screws.
Twin platform bed with trundle, cut four 2-times-4 pieces to 10 inches. Attach the ends of the pieces. Place a 10-inch piece in each vertical face on the bed frame. Reinforce the joints with screws long screws. Cut a piece 2-times-4 to 76-inches. Attach the end to the faces of the piece. Attach the piece to the bottom of the bed frame, 30 inches from the right side. Cut two pieces of 2-times-4 to 26 inches. Attach the end faces. Place the pieces between the 76-inch piece and the side of the frame, 16 inches from the end of the frame. These are support pieces to prevent drawers falling into bed when closed.